Design
M4 with M68 Close Combat Optic and AN/PAQ-4
The M4/M4A1 5.56 mm Carbine is a gas-operated, air-cooled, magazine-fed, selective fire, shoulder-fired weapon with a telescoping stock. A shortened variant of the M16A2 rifle with a 14.5 in (368 mm) barrel, the M4 provides the individual soldier operating in close quarters the capability to engage targets at extended range with accurate, lethal fire. The original M4 Carbine has semi-automatic and three-round burst fire modes, while the M4A1 has "semi" and "full auto", with no three-round burst. The M4 Carbine achieves over 80% commonality with the M16A2 rifle and was intended to replace the .45 ACP M3 submachine guns and selected M9 pistols and M16 rifle series with most Army units (this plan was thought to be changed with the development of the XM29 OICW and the XM8 carbine. However, both projects were cancelled.). The M4 Carbine is also capable of mounting the M203 grenade launcher,the M203A1 with a 9-inch barrel as opposed to the standard 12-inch barrel of the M203 used on the M16 series of rifle.
Some features of the M4 and M4A1 compared to a full-length M16-series rifle include:
Compact size
Shorter barrel 14.5 in (368 mm)
Telescoping buttstock
However, there have been some criticisms of the carbine, such as lower muzzle velocities and louder report due to the shorter barrel, additional stress on parts because of the shorter gas system, and a tendency to overheat faster than the M16A2.
Accessories
An M4 just after firing, with an ejected case in mid-air; the M203 and M68 CCO are attached.
Like all the variants of the M16 assault rifle, the M4 Carbine and the M4A1 Carbine can be fitted with many accessories, such as night vision devices, laser pointers, telescopic sights, bipods, either the M203 or M320 grenade launchers, the M26 MASS shotgun, and anything else compatible with a MIL-STD-1913 Picatinny rail.
Other common accessories include the AN/PEQ-2, Advanced Combat Optical Gunsight (ACOG), and M68 Aimpoint. EOTech holographic weapon sights are to be part of the SOPMOD II package. Visible and IR (infrared) lights of various manufacturers are also commonly attached using various mounting methods. As with all versions of the M16, the M4 accepts a blank-firing attachment (BFA).
M4 with M68 Close Combat Optic and AN/PAQ-4
The M4/M4A1 5.56 mm Carbine is a gas-operated, air-cooled, magazine-fed, selective fire, shoulder-fired weapon with a telescoping stock. A shortened variant of the M16A2 rifle with a 14.5 in (368 mm) barrel, the M4 provides the individual soldier operating in close quarters the capability to engage targets at extended range with accurate, lethal fire. The original M4 Carbine has semi-automatic and three-round burst fire modes, while the M4A1 has "semi" and "full auto", with no three-round burst. The M4 Carbine achieves over 80% commonality with the M16A2 rifle and was intended to replace the .45 ACP M3 submachine guns and selected M9 pistols and M16 rifle series with most Army units (this plan was thought to be changed with the development of the XM29 OICW and the XM8 carbine. However, both projects were cancelled.). The M4 Carbine is also capable of mounting the M203 grenade launcher,the M203A1 with a 9-inch barrel as opposed to the standard 12-inch barrel of the M203 used on the M16 series of rifle.
Some features of the M4 and M4A1 compared to a full-length M16-series rifle include:
Compact size
Shorter barrel 14.5 in (368 mm)
Telescoping buttstock
However, there have been some criticisms of the carbine, such as lower muzzle velocities and louder report due to the shorter barrel, additional stress on parts because of the shorter gas system, and a tendency to overheat faster than the M16A2.
Accessories
An M4 just after firing, with an ejected case in mid-air; the M203 and M68 CCO are attached.
Like all the variants of the M16 assault rifle, the M4 Carbine and the M4A1 Carbine can be fitted with many accessories, such as night vision devices, laser pointers, telescopic sights, bipods, either the M203 or M320 grenade launchers, the M26 MASS shotgun, and anything else compatible with a MIL-STD-1913 Picatinny rail.
Other common accessories include the AN/PEQ-2, Advanced Combat Optical Gunsight (ACOG), and M68 Aimpoint. EOTech holographic weapon sights are to be part of the SOPMOD II package. Visible and IR (infrared) lights of various manufacturers are also commonly attached using various mounting methods. As with all versions of the M16, the M4 accepts a blank-firing attachment (BFA).
Posts
No comments:
Post a Comment